Producción y caracterización de recubrimientos de bismuto producidos con magnetrón desbalanceado pulsado
PDF (Español (España))

How to Cite

Ortiz, M. F., Alfonso, J. E., & Rodil, S. E. (2013). Producción y caracterización de recubrimientos de bismuto producidos con magnetrón desbalanceado pulsado. Revista De La Academia Colombiana De Ciencias Exactas, Físicas Y Naturales, 37(143), 245–251. https://doi.org/10.18257/raccefyn.7

Downloads

Download data is not yet available.

Métricas Alternativas


Dimensions

Abstract

In this work present the results obtained in the growth of Bi coatings onto common glass, silicon and stainless steel 316 L substrates through dc unbalanced magnetron sputtering and evaluation of the microstructure, morphology, chemical superficial composition and electrochemical properties was made as a function of the frequency pulse of the power supply are presented. The microstructure of the coatings was evaluated through x-ray diffraction (XRD); the morphology was evaluated through atomic force microscopy (AFM); the superficial chemical composition was analyzed by x-ray photoelectrons spectroscopy (XPS), electrochemical test was evaluated by means of corrosion windows and the adherence between coating and substrate was evaluated by streaked test. The XRD analysis shows that the coatings are polycrystalline, the AFM analysis determined that the mean rugosity of Bi coatings was of the 25 nm. The XPS analysis shows that there are binding energies as- sociated to metallic bismuth and oxide bismuth. The electrochemical test established that the Bi coatings show a range of potential between -0,315 y 1,49 mV. Finally, the adherence test show that the coatings failure occurs when is subjected to a load of 4.5 N.
https://doi.org/10.18257/raccefyn.7
PDF (Español (España))

Declaration of originality and transfer author's rights

The authors declare:

  1. The published data and reference materials have been duly identified with their respective credits and have been included in the bibliographic notes and citations that have been so identified and that should it be required, I have all releases and permissions from any copyrighted material. 
  2. All material presented is free from any copyright and that I accept full legal responsibility for any legal claims relating to copyrighted intellectual property, fully exonerating from responsibility the Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales.
  3. This work is unpublished and will not be sent to any other journal while waiting for the editorial decision of this journal. I declare that there is no conflict of interest in this manuscript.
  4. In case of publication of this article, all author´s rights are transferred to the Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales, and so cannot be reproduced in any form without the express permission of it.
  5. By means of this document, if the article is accepted for publication by the Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales, the Revista assumes the right to edit and publish the articles in national and international indices or data bases for academic and scientific use in paper, electronic, CD-ROM, internet form either of the complete text or any other known form known or to be known and non-commercial, respecting the rights of the authors.

Transfer of author rights

In case the article is approved for publication, the main author in representation of himself and his co-authors or the main author and his co-authors must cede the author rights of the corresponding article to the Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales, except in the following cases:

The authors and co-authors will retain the right to revise, adapt, prepare derived works, oral presentations, and distribution to some colleagues of reprints of their own published work, if the corresponding credit is given to the Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales. It is also permissible to publish the title of the work, summary, tables, and figures of the work in the corresponding web sites of the authors or their employers, also giving credit to the Revista.

If the work has been realized under contract, the author’s employer has the right to revise, adapt, prepare derivative works, reproduce, or distribute in hard copy the published work, in a secure manner and for the exclusive use of his employees.

If the Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales were approached for permission by a third party for using, printing, or publishing specifically articles already published, the Revista must obtain the express permission of the author and co-authors of the work or of the employer except for use in classrooms, libraries, or reprinted in a collective work. The Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales reserves the possible use in its front cover of figures submitted with the manuscripts.

No other right, other than the author’s right, can be claimed by the Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales.